|
i think the B&Os are just a bit noisy at full gain in anything.
i have a lot pres and have yet to find one that would cure the B&O inadequate output:(~
i have been chat with an individual about transformer as well as magnet upgrades.
as i understand, the magnets are weak in the B&O, this is the major issue.
i have not found the EM-BLUE to be to noisy with my B&O but then again i do not run it all out.
if i need something hot i just go to a different mic.
i am not 100% sure but as i recall it is 66 db, or 68 db of gain, i will check and see.
|