Thread: Calrec desks?
View Single Post
Old 2nd March 2008, 10:41 PM   #30
Matt Syson
Lives for gear
 
Join Date: Sep 2004
Location: UK
Posts: 1,478
Hi
I believe they will all use Lundahls but one of the mic transformers was 'phased out' at some time as Lundahl had a need to change the design (could not get the correct steel or something if I remember correctly).
Yes all should have a proper line driver to increase current capability and level to drive with sufficient headroom. The maximum you can get unbalanced from 16 Volt rails is +21dBu which is not sufficient for good headroom certainly compromising the capability of the modules. Balancing it gives 6dB headroom boost for starters.
Matt S
__________________
Matt S
www.mseaudio.co.uk
Matt Syson is offline   Reply With Quote