Gearslutz.com - View Single Post - Lavry DA-10 Polarity?

Chris Kress · 24th February 2008

I just finished a day of fixing polarity issues concerning my trident console (pin 3 hot). In the course of doing so, I noticed that the output of both of my lavry DA-10s seemed to have reversed polarity. I substituted another converter in its place, keeping everything else consistent, and the problem went away. I opened one lavry chassis and checked the manual to make sure the jumpers were proper, and they were. I ended up reversing the polarity of the cables connected to the xlr analog outs of both lavrys and then everything checked out.

I didn't have time to thoroughly test so I must have overlooked something. Anyone have an easy way to check theirs or noticed any problems? Thanks.

24th February 2008	#1
Chris Kress Lives for gear Joined: Jul 2005 Posts: 552 Thread Starter	Lavry DA-10 Polarity? I just finished a day of fixing polarity issues concerning my trident console (pin 3 hot). In the course of doing so, I noticed that the output of both of my lavry DA-10s seemed to have reversed polarity. I substituted another converter in its place, keeping everything else consistent, and the problem went away. I opened one lavry chassis and checked the manual to make sure the jumpers were proper, and they were. I ended up reversing the polarity of the cables connected to the xlr analog outs of both lavrys and then everything checked out. I didn't have time to thoroughly test so I must have overlooked something. Anyone have an easy way to check theirs or noticed any problems? Thanks.