[Ruphus]

No, Teacher,

for outboard procedure and final judge on the mix I use the Lavry.
The only problem I have with monitoring through it is that I yet have no passive pot to control volume ( need to adjust from DAWS master fader ) and also have to plug around. That is how the DAC1 comes in handy and being used for normal monitoring tasks.

They day I get a volume control I´ll probably still use it on the rig for its great connex options and the nice opportunity to feed it digitally from the stereos CD player for occasional comparisons.

However, while we are at it, there is a weird phenomenon. The feed from CD player goes through a 6 meter RCA cable ( one with usual impedance for audio [50 ohm I guess ], not a 75 ohm one ), and after a couple of weeks it stops transporting any signal through anymore. Have to exchange the cable with another one ( pulling and plugging in again doesn´t do it ) and then it works again. Really very curious, sounds almost impossible to myself. Asked Benchmark folks already, but didn´t get any advice I could follow.

Gave one of the out-sorted cables to a friend, he says it works just fine on his stereo, so the cables should be just fine.

Just besides.

Ruphus