Quote:
Originally Posted by danijel  thanks for the info. at the time of writing that post, i didn't define my frustration with 1176ln well, because i don't own it, and it has been a while since i tested it.
but now i will try (correct me if i'm wrong):
if i just want to move the threshold lower (in terms of standard compressor controls), i would in fact have to move the input up, and the output down (to compensate, due to the internal threshold). so, it would involve a lot of fiddlin' to satisfy my compulsive-obsessive need to be able to bypass at any given sample, and see the low levels untouched.
but, as you said, it certainly is possible! |
You are correct, but it is a fairly quick process. I do it all the time when mixing, and the controls on the UAD are pretty linear. I would do a quick bypass/compare after setting it to make sure levels match.
