Gearslutz.com - View Single Post

boojum · 12th February 2008

Using Jecklin's latest specs I built one from an old Oral Roberts LP. I covered it with 1/2" foam on either side using spray adhesive to hold it in place. I then got some synthetic white lamb's fleece and made a cover for the foam. I was using a pair of OKM II's to play with so I stuck them on the ends of a bar that passed through the spindle hole of the LP. Some bent wire elevated the mics and gave them the proper angles. Yes it works and works well. I am going to remodel it now for a pair of DPA 4006 TL's.

Jecklin is a good thing to have.

12th February 2008	#14
boojum Lives for gear Joined: May 2007 Location: Astoria, OR, US&A Posts: 2,300 1 Review written	Using Jecklin's latest specs I built one from an old Oral Roberts LP. I covered it with 1/2" foam on either side using spray adhesive to hold it in place. I then got some synthetic white lamb's fleece and made a cover for the foam. I was using a pair of OKM II's to play with so I stuck them on the ends of a bar that passed through the spindle hole of the LP. Some bent wire elevated the mics and gave them the proper angles. Yes it works and works well. I am going to remodel it now for a pair of DPA 4006 TL's. Jecklin is a good thing to have. __________________ Nov schmoz ka pop.