Gearslutz.com - View Single Post - Need help with room acoustics, room plan included
View Single Post
Old 11th February 2008   #3
Ethan Winer
Gear Guru
 
Ethan Winer's Avatar
 
Joined: Oct 2002
Location: New Milford, CT, USA
Posts: 12,331

Lightbulb

Quote:
Originally Posted by bnz View Post
What sort of acoustic treatment do you think would be best for this room shape?
That's small but typical. Here's my standard answer:

Room treatment is a deep subject, and a complete answer requires far more than will fit into a single reply here. So here's the short version. All rooms need:

* Broadband (not tuned) bass traps straddling as many corners as you can manage, including the wall-ceiling corners. More bass traps on the rear wall behind helps even further. You simply cannot have too much bass trapping. Real bass trapping, that is - thin foam and thin fiberglass don't work to a low enough frequency.

* Mid/high frequency absorption at the first reflection points on the side walls and ceiling.

* Some additional amount of mid/high absorption and/or diffusion on any large areas of bare parallel surfaces, such as opposing walls or the ceiling if the floor is reflective. Diffusion on the rear wall behind you is also useful in larger rooms.

For the complete story see my Acoustics FAQ.

There's a lot of additional non-sales technical information on my company's site - articles, videos, test tones and other downloads - linked under my name below.

--Ethan
Ethan Winer is offline   Reply With Quote