| For anybody who wants to get an insight into the mic cable question, I suggest connecting a mic directly to the pre-amp and comparing that to a connection via good length of any mic cable.
This at least indicates what might be lost and can direct you toward the cable that sounds the most like the direct connection.
For my testing of this I simply attach my mics directly to the pre-amps but I also built a very simple connector from two XLR connectors essentially soldered together back-to-back. This allows almost any mic to be plugged straight into the pre-amp. Cheap and easy to build.
Andy
PS, I can post some clips in the spirit of this forum if anybody is interested..... |