Gearslutz.com - View Single Post

camerondye · 2nd February 2008

I hooked up the Digimax with the ADAT cables, the RME automatically noticed it, I turned the Digimax to clock from the RME and not internal, chose 44.1, and it works perfectly so far...no pops or cracks. I will hook up the BNC just to make sure it works perfectly.

All I have to do is hook up the cable, change the Digimax FS to clock to BNC, and then terminate at the Digimax...right??? Never used a setup with ADAT before. The preamps on the Digimax seem fine also, probably better than the RME's, which I htink are usable if needed.
Thanks,
Cameron

2nd February 2008	#4
camerondye Lives for gear Joined: Jan 2007 Location: Durham, NC Posts: 1,417 Thread Starter	I hooked up the Digimax with the ADAT cables, the RME automatically noticed it, I turned the Digimax to clock from the RME and not internal, chose 44.1, and it works perfectly so far...no pops or cracks. I will hook up the BNC just to make sure it works perfectly. All I have to do is hook up the cable, change the Digimax FS to clock to BNC, and then terminate at the Digimax...right??? Never used a setup with ADAT before. The preamps on the Digimax seem fine also, probably better than the RME's, which I htink are usable if needed. Thanks, Cameron