Quote:
Originally Posted by DaveTherrien  Yipes - that was a fast response.
When I fire up Cubase, the Cubase light goes on on the N12. That's a good sign.
I select File - New Project from Cubase, and select Yamaha N12 Stereo Recording.
At this point, without doing anything else, I can't seem to make the ST-MIX switch light up by pressing it. Is that supposed to be the way it works ? All of the track control and transport controls are not working from the N12. I can't make the metronome work. THere must be something I'm not doing right.
How do I check levels in Cubase ?
If anyone has a basic series of steps that works, that might be helpful.
Thanks |
I've seen this happen before. It was a funky FW card.
Before replacing the card Try removing the driver and reinstalling it.
This step is VERY IMPORTANT...
1 make sure no FW or MIDI devices are connected.
Connect the n12 but NO POWER
Install driver
Restart the computer
NOW turn on the n12 power
Maybe that will work
Many of us fail to to it EXACTLY that way and it can cause your symptoms.
If no luck,
714 522-9000 the guys will get you going or you will need another FW interface.