Gearslutz.com - View Single Post - Mixing Room, Production Room, Slanted Ceiling
View Single Post
Old 21st December 2007   #5
jazzymike
Gear addict
 
Joined: Dec 2007
Location: Vienna, Austria
Posts: 316

Thread Starter
Thank you all very much for the quick replies!

Indeed as I suspected the low to high amphitheater way should present me with less headache.

However I'm really concerned with the >2m triangle, since that would put me (unless the JBL's were tucked into the slant corners - and let me add that they're bass-reflex) more or less right in the middle, so much for 38%...
The dimensions are 496cm (l) x 346cm (w) x 100-3..cm (height-slant-diagonale)

I'd rather not do any structural changes since it's a rent (europe). However side-to-side absorption is a must, and I suspect some bass traps in the rear will be necessary. But first, the nearfield-sweetspot dilemma ,)

budgetwise.. well I'd rather get away with 1-2k, I'm notorious for improvising with furniture as frequency traps.. but this time I'd like a minimal approach not involving IKEA crap :D
jazzymike is offline   Reply With Quote