Quote:
Originally Posted by jindrich  Johannes,
Großartige Idee, nicht nur für Akustik sondern auch um alle Räume des Studios zu dekorieren, aber wäre es nicht besser gewesen den größeren Bildrahmen benutzt zu haben? Danke für den Tipp jedenfalls. |
Hi jiindrich,
I actually used the bigger frames for the "drum corner" of my recording room - especially on the hihat side to avoid those nasty early reflections.
My concept for the control room was more a mixed pattern from absorbtion and reflection. I experimented alot and through having more wall space between them the smaller frames create a nicer spatial image in the end. Too big areas of absorbtion easily make the room muddy.
The very small frames ( say 10 x 5 cm) would have been even better -creating allmost some kind of diffusion but this would have been a lot more work.
2nd reason for the smaller frames is visual - many small elements make a small room look bigger than little big ones...
Quote:
Originally Posted by jindrich By the way, seems you made quite a notorious gear clean up and went down to basics, didn't you? Also seems you removed all racks from the floor to put them on the table; don't they interfere with the Questeds' sigth lines now? |
Right, less is more in the end.
I find myself using more and more the same stuff (gml + neve) and if I need something else the other day I eventually use...errr gml + neve hrhr..
I removed the side racks cause I found it really strange to tweak things not being in the sweet spot.
Now everything is in hands reach - right the one rack is a bit near the left quested - doesn´t make much of a difference since tweeter still is in sightline.