Quote:
Originally Posted by HughH  Hello,
This was also posted on the Nuendo post forum.
The X-48 is finally out.......
H |
Thanks Hugh...Are you recording straight to firewire? I noticed when formatting a firewire drive for the X48 the manual we recieved was unclear....Where it says to right click the bar we actually had to use the partitian drive dialouge box.
Thanks for the info. Hope all is well!
Scott P.
DFX
Formatting a New Drive
A new hard drive needs to be formatted before recording on the X-48. To do this:
Mouse/Keyboard Operation
• Click the File menu and choose Disk Management...
• The X-48 warns you that it will shut down after running this application. Click Yes
(or No) to save your project first.
• The next prompt warns you that you can do some serious damage by misusing the
Disk Management tool, such as modifying the C: drive. Click OK when you're ready
to begin.
• The Disk Management tool opens. Disk0 should be the startup disk, partitioned into
the C: drive (your operating system and program files), and the D: drive (the Data
partition you can write to).
• If you've connected a FireWire drive, you should see it mounted as Disk1.
To format this disk, right-click the bar on the right and select "Format."
• Give the disk a name and click OK twice.
• When you're finished, click the Close box in the top right corner. The X-48 will shut
down. Restart the recorder to begin using your drive.