Gearslutz.com - View Single Post - Pete Cornish Effects Board (Tears for Fears)
View Single Post
Old 19th April 2004   #19
A33
Gear addict
 
A33's Avatar
 
Joined: Aug 2003
Location: Near London
Posts: 447

I have had it checked over by a Chartered Electrical Engineer here are his comments.

" Construction quality is very high, all wiring loomed and held down. Components on boards are restrained to withstand vibration / shock. Despite being 20 years old the case, components are wiring are in sound condition - some surface corrosion due to damp storage conditions - however the electrical operation was verified. Two of the 27v indicator lamps are blown (easy to replace possibly using spares on the board) one of the footswitches works but sticks (maybe fixed with cleaning or swapped with spare on the board). Noise reduction techniques in the design and construction are as good as I have seen - the unit is almost noiseless producing a clear clean sound from each module working together or seperately - it is easy to understand why P Cornish's designs have been so highly regarded - a pleasure to see such carefully designed and built equipment."

Now comes with power cable.
A33 is offline   Reply With Quote