Gearslutz.com - View Single Post - ADAT I/O wordclock (I know I know)
View Single Post
Old 14th April 2004   #3
NathanEldred
Lives for gear
 
NathanEldred's Avatar
 
Joined: Jun 2002
Location: West Coast Central Florida
Posts: 7,242

Send a message via AIM to NathanEldred
Don't worry about it too much. The Lavry clock will significantly improve the Digimax and any RME product. The Samplitude/Hammerfall HDSP combo is stable (it's what I use 24/7 in a commercial setting). Get a distribution box like the Lucid and use the Lavry for the main clock into the Lucid...if what's in front of the mic sounds good (and your room, mics and preamps aren't taking away from the quality too), it will be good. You can skip the distribution box all together as long as only the last connection in the chain is terminated (you would have to make sure and check the specs of each product that is utilizing a 75 ohm BNC connection to make sure it's able to be turned on or off).
__________________
Nathan Eldred
Visit Atlas Pro Audio
NathanEldred is offline   Reply With Quote