Since we don't get manuals with the Shadow Hills Mastering Compressor maybe we should start a thread with all of the little tidbits of information that we all pickup.
For anyone who has to replace an indicator light on the Shadow Hills Mastering Compressor...
The little green lens screws off and then the little bulb is exposed. After wrestling with the bulb for a while - and not knowing if it pulled out, unscrewed, pushed in and turned - I ended up shattering the light bulb. As I was cleaning up the little pieces of glass (thanking God that none ended up in my eyes) I decided maybe I would post and maybe save others from the same fate. I used tweezers, needle-nose pliers with double sided tape, and anything else I could think of. Nothing seemed to get a grip on the bulb before it shattered. It was actually easier after it shattered.
It unscrews! I used a Q-tip to shove in the hole and the sharp edges of the remaining glass provided a nice grip to unscrew the bulb.
I found a marking on the bulb that said "342". I found them on line at:
Light Bulb Depot.
Happy Compressing!!
Don