Quote:
Originally Posted by Kris  timsmolens, as far as the 'direct out' issue... I think you'll find there is none... It seems as if only one user has mentioned this 'issue'... and it's probably user error, or an issue with that single board, or what it's connected to. |
So you're confident that one of the following must be true
1: I don't have a clue what I doing
2: Redco doesn't have a clue how to make cables when provided with pinouts
3: My ATR is whacked and not lined up.
4: My board is whacked on all channels.
Hmmm. And you're basing your opinion on a tape based system or what ?