| There's an insert plug-in in Logic. Thats the proper way to do it.
Or you can do:
1: route the original audio stream to 3-4 (distressor)
2: Hook distressor to inputs 3-4
3: Inside Logic route inputs 3-4 to output 1-2 (which is supposedly your monitors?)
You shouldn't be hearing anything else but the signal from distressor. EXCEPT if you're routing input 3-4 to output 1-2 in the RME totalmix. To check this press the output list in the totalmixs output row (middle one) and click 1-2. Now all the faders show output to 1-2 and only the 1-2 faders should be up. |