Quote:
Originally Posted by x99  Hey Eduardo,
I'm curious to know the process for hanging the ceiling frame, ie is the frame built on the floor the hoisted up to the hangers, or is each length of timber hung individually and then joined to make a completed frame? |
I don't know if I unsderstood well the 2 processes you asked me (my technical english is not ver good).
The process is like this:
1 - The hangers are all installed as you can see on a pic.
2 - The wood beam is cut to the length of the room.
2 - Take the exact measures of the spacing between the hangers and then mark on the beam.
3 - Make the holes to get the screws through
4 - Put the beam in place supported by the metal rails (since it is only the beam, the weight is well supported by the rails)
5 - insert the screws through the holes and screw them on the hangers..
6 - Use the screws to align the beam.
I hope you understand...
Quote:
Originally Posted by Fleaman Wondering about lining the ducts interior with foam to cut noise....won't moisture/mold build up in the foam? |
The foam is a denser one, and the face that has contact with the air is like a mix of foam and rubber.