Quote:
Originally Posted by sphykik  I would like to have 8 inputs (2OH, 3 tom, snare, kick and subkick)
my mixer is a behringer 1202, i dont think is supports what you are talking about though....
could i get the delta 1010lt, and then get a preamp like this? Buy Nady PRA-8 Mic Preamp online at Musician's Friend
thanks |
i assume you're talking about a behringer ub-1202. i looked up the specs on your board, and it looks like you can get at least 3 of the preamps running through sperate channels. you can pan one of them hard left and the other hard right, and run the left and right main outputs into channels on your interface. then you can run another channel out of the aux send into an input on your mixer.
if you go with the 1010lt, that would give you five separate inputs (3 off the board, plus the two built-in 1010lt pres). i've heard bad things about the nady stuff, but if you decide to go the 8 preamp route, you might also check out sm pro audio. its comparably priced, but i can't speak for its quality.
you also might want to think about an m-audio
audio buddy. its a cheap little two channel pre, but it's very usable and doesn't totally suck. you can pick one up for around $50 used (or two of them, giving you more than enough pres for all 8 channels with the board and the 1010lt)