Quote:
Originally Posted by Scott@RealTraps  Yep, I'd agree that's a good way to do it.
I would say, as a general rule for this kind of trap, it's probably better NOT to glue it, as you risk impeding the gas flow through the fibers if you use too much glue, or the wrong kind of glue, etc.
Also, to answer the other question asked above about stapling, 703 is not so rigid that you could staple something to it. |
I am sure if you nailed a full can of spray glue on the front it may hurt it, but a little bit will not and I would think that is all it would take.. But if nothing else the sewed idea is not to bad.