Gearslutz.com - View Single Post - How best to clock: Let's separate fact from myth.

Larry Crane · 11th February 2007

I didn't see anyone mention this, but for gear not terminated and without a switch, you can put a T connector on the BNC and a termination plug on one end, the other connect to the last piece of gear in the chain. Apogee has you do this to every BNC cable coming off a Big Ben or such. I had to order a bunch of T's and terminators a while back!

11th February 2007	#19
Larry Crane Tape Op Joined: Mar 2003 Location: Portland, Oregon, USA Posts: 90	I didn't see anyone mention this, but for gear not terminated and without a switch, you can put a T connector on the BNC and a termination plug on one end, the other connect to the last piece of gear in the chain. Apogee has you do this to every BNC cable coming off a Big Ben or such. I had to order a bunch of T's and terminators a while back! __________________ Larry Crane, editor Tape Op Magazine/owner Jackpot! Recording http://www.tapeop.com http://www.jackpotrecording.com ++++please do not pm me here! contact through http://tapeop.com/contact/email/larry-crane/