Gearslutz.com - View Single Post - New RTAS/TDM Distortion Plug-In

sound and form · 16th December 2006

Hey all,

Looks like we lost a few posts in this thread when the board went down. To reiterate... the tape delay plug is still under development. And, the latest full version of the limiter added Audiosuite support. So, make sure you're up to date. (Contact me on email if you need your download details again.) I hope to update all the plugs with AudioSuite over time.

The feedback is recreating what the real box often does just sitting there. At high gain levels, it starts to feedback on itself, internally. It adds a particular resonance to the distortion quality. But, without audio passing through it, this harmonic tone can get annoying pretty quickly! So, with the extra control you can optionally "suppress" the feedback all the time or when just when playback/record is stopped.

I know, I know! I got lazy with the bypass button. I'll "fix" that in a later update

Steve

RoundBadge, very interesting idea about the parallel mix-buss processing! I'll have to get that a try.

16th December 2006	#18
sound and form Gear nut Join Date: Feb 2004 Location: San Francisco, CA Posts: 118 Thread Starter	Hey all, Looks like we lost a few posts in this thread when the board went down. To reiterate... the tape delay plug is still under development. And, the latest full version of the limiter added Audiosuite support. So, make sure you're up to date. (Contact me on email if you need your download details again.) I hope to update all the plugs with AudioSuite over time. The feedback is recreating what the real box often does just sitting there. At high gain levels, it starts to feedback on itself, internally. It adds a particular resonance to the distortion quality. But, without audio passing through it, this harmonic tone can get annoying pretty quickly! So, with the extra control you can optionally "suppress" the feedback all the time or when just when playback/record is stopped. I know, I know! I got lazy with the bypass button. I'll "fix" that in a later update Steve RoundBadge, very interesting idea about the parallel mix-buss processing! I'll have to get that a try.