Quote:
Originally Posted by zappa  Thanks baikonour 
Out of interest, what's your monitoring setup, especially when you compared the 400 and 800? I've assumed the differences between the units to be small, but I'm guessing those differences would be revealed better on higher end monitors and/or cans.
Do you use the FF 400/800 as the unit that connects to your monitors or do you have some kind of attenuator sitting between the FF and the monitors?
Last question (sorry to repeat myself) does the digital knob on the 400 remember which channel(s) it's controlling between switch-off and on?
Thanks again! z. |
the ff800 outs are directly connected to the Dynaudio bm6 (you can control the monitor volume with the RME software)
the ff400 outs feeds a drawmer 1968 ME then goes through a presonus headphones/monitor controler thingy to a pair of Adam A7
not sure about the digital knob...i guess it keeps the last setting in the flash memory as it's related to the routing software...But I'm not sure...you should check the manual on the RME website.
best