Gearslutz.com - View Single Post - I started building a small studio
View Single Post
Old 3rd December 2006   #25
EduardoApolonia
Lives for gear
 
EduardoApolonia's Avatar
 
Join Date: Jul 2002
Location: Almancil, Portugal
Posts: 564

Thread Starter
Quote:
Originally Posted by DirkB View Post
Great thread!

Just curious: could you give some info on the dimensions of your place? I.e. what is the length&width of the bare space and what will be the inner dimensions of CR and LR?

Keep up the good work!

Greetings,
Dirk
Dirk,

It's a small studio, the dimensions of the bare space are 11.40mt x 5,30mt, the side walls +/- 4,90mt and the back wall is +/- 5,20mt.

The inner dimensions is hard to tell because both rooms are not rectangle. They have various angles.

But to give you an idea of the CR, the front wall is +/- 3mt, the side walls +/- 4,90mt and the back wall is +/- 5,20mt.

The recording room is +/- 6,60m x 4,90m x 5,50m x 4,90m

Hope that helps


Quote:
Originally Posted by DarkSky View Post
Eduardo,
It may seem like a bad thing, but actually it is really good that you found out about that now.

Much easier and cheaper to find it and fix it now than further down the track when a) it might have caused major damage before you detected it and b) it might have cost hugely to locate and correct the problem.

So actually, maybe it's a stroke of luck if you look at it that way.
That was actually the only good part of it
I had thought about it as you said. It would be a nightmare to find the water on the finished ceilling.
__________________
http://www.myspace.com/eduardoapolonia

Reamp service available:
30 different amps (Bogner, Custom Audio Amplifiers, Diezel, Fender, Krank, Marshall, Mesa, Orange, Peavey, EVH, Soldano, Splawn, Vox)
7 different cabinets (Bogner, Diezel, Marshall, Mesa, Mills, Orange)




Contact me for details
EduardoApolonia is offline   Reply With Quote